Product Features

MSCP系列適用于30T-300T的各型臥式射出成型機的成 品及水口取出。上下手臂有單截式MSCP06ISS0P0及雙 截 式 MSCW06ISS0P0 ， 單 截 伺 MSCP06ISS0P0,

MSCP07ISS1P0, MSCW06ISS0P0 ,采用氣壓或者伺服

驅動。上下、引拔、旋出、旋入均采用氣壓驅動，速度 快、高效率、經濟實惠型機械手臂。安裝機械手可增加 產能（10-30%）、降低產品的不良率、保障操作人員 的安全性、減少人工、精準控制生產量、減少浪費。

MSCP series Swing-arm robot is applicable to all types of  horizontal injection machine of 30T~300T for take-out  products and sprues. It has ranges of model  MSCP06ISS0P0 and MSCW06ISS0P0, with two types of  arms, single stage and telescopic type. The single function  is to clamp products, and the full function is to take-out  products and sprues. Swing arm robot with one axis servo  ranges of  model MSCP06ISS0P0, MSCP07ISS1P0,  MSCW06ISS0P0. After installed this robot, the productivity  will be increased 10~30%, reduce defective rate, ensure  safety of operators, reduce manpower and accurately  control the output to reduce waste.

MSCB06/07系列適用于30T-200T的各型臥式射出 成型機的成品及水口取出。上下手臂結構是單截 式，分單臂和雙臂，各軸可選用電動調位，適合二/三板模取出。橫行AC伺服馬達驅動，定位精確、 速度快、壽命長、故障低。安裝機械手可增加產能

（10-30%）、降低產品的不良率、保障操作人員 的安全性、減少人工、精準的控制生產量、減少浪 費、保證納期。

MSCB06/07 Series is applicable to all types of  horizontal injection machine ranges of 30T~200T for  take-out products and sprues. Vertical arm is single  type, with product arm and runner arm two types,  suitable for two plate or three plate mold products  take out. Traverse axis driven by AC servo motor.  After installed this robot, the productivity will be  increased 10~30%, reduce defective rate, ensure  safety of operators, reduce manpower and accurately  control the output to reduce waste.

MSCG08/10WSS3 MSCG12WDS5 PC/FC系列適用

于120T-500T的各型臥式射出成型機的成品及水口取 出。上下手臂型式是雙截式，單臂適合二板模取出。 橫行和正臂上下均由AC伺服馬達驅動，取出速度快、 定位精準、調治具方便快速。安裝機械手可增加產能  (10-30%)、降低產品的不良率、保障操作人員的安全 性、減少人工、精準的控制生產量、減少浪費。

MSCG08/10WSS3/S5 MSCG12WDS5 PC/FC Series is

applicable to all types of horizontal injection machine  ranges of 120T~500T for take-out products and sprues.  Vertical arm is telescopic type, suitable for two plate mold  products take out. Traverse axis and vertical axis driven  by AC servo motor. After installed this robot, the  productivity will be increased 10~30%, reduce defective  rate, ensure safety of operators, reduce manpower and  accurately control the output to reduce

MSCR系列機械手臂適用100T-250T的各型臥式射出成型機，手臂 形式是單截式，分3軸及5軸AC伺服驅動。取出時間1sec，全循環

6sec應用于快速取出或是模內貼、模內鑲件等特殊產品應用。

華成三/五軸專用CANOPEN總線通訊方式：

信號線少，遠距離通訊，擴展性能好，抗干擾能力強，重復定位精 度高，可以同時控制多軸，設備維護簡單，故障率少。

MSCR Series is applicable to all types of horizontal injection machine  ranges of 100T~250T for take-out products and sprues. Vertical arm is  single stage. With types of three-axis and five-axis driven by AC servo  motor. Products take-out at super high-speed (1sec.) and dry cycle time  within 6seconds， applicable to take-out products with short forming  cycle or complex automatic. Also with the function of mold labeling and  mold inserting.

HC three-axis/five axis CANOPEN connecting way:

Less connecting line, long distance communication, good expansibility,  strong anti-interference ability, high repeat precision, can  simultaneously control multi axis, simple equipment maintenance, low  failure rate.

MSCN系列機械手臂用于650T-3200T的各型塑膠射出成型機， 三軸AC伺服驅動。取出速度快、調整夾具方便，壽命長、故障 低。取出時間最少2.5sec，最大荷重50公斤（ 含成品與治 具）。主要應用于快速取出或是復雜的取出應用，特別是長形 狀的產品如汽車產品，洗衣機家電產品等。

華成三/五軸專用CANOPEN總線通訊方式：

信號線少，遠距離通訊，擴展性能好，抗干擾能力強，重復定 位精度高，可以同時控制多軸，設備維護簡單，故障率少。

MSCN Series is applicable to all types of horizontal injection  machine ranges of 650T-3200T for take-out products and sprues,  Three-axis driven by AC servo motor, take-out at super high-speed  at most 2.5sec. Easy for E-O-A-T adjustment, long using life and  low failure rate, applicable to take-out products with short forming  cycle or complex automatic, such as auto products, washing  machine and household appliance products take-out.

HC three-axis/five axis CANOPEN connecting way:

Less connecting line, long distance communication, good  expansibility, strong anti-interference ability, high repeat  precision, can simultaneously control multi axis, simple equipment  maintenance, low failure rate.